Six-port, chrome-plated brass barstock, single stage regulator for ultra-high pressure applications
The CONCOA 492 Series cylinder regulator provides primary pressure control of non-corrosive gases in high purity applications requiring ultra-high pressure. Rather than a diaphragm, the 492 Series regulator uses a robust piston assembly to ensure safe pressure control at high inlet pressures. The CONCOA 492 Series regulator is available with a variety of options installed at the factory. The regulator may be configured as a single station manifold with or without purge, low-pressure alarm, or multiple inlets.
Features
- Large piston pressure sensor safely controls up to 6000 PSIG (415 BAR)
- CAPSULE® seat design features integral 360° filtration
- Front and rear panel mount eases installation
- Spectrometric helium leak check verifies leak integrity
Specification
- Max inlet pressure (bare body): 3000 PSIG (210 BAR); 5500 PSIG (380 BAR); or 6000 PSIG (415 BAR)
- Body: Chrome-plated brass barstock
- Bonnet: Chrome-plated brass barstock
- Gauges: 2 1/2 in (68 mm) diameter plated case
- Seat: PCTFE 3000 PSIG (210 BAR) and 4500 PSIG (380 BAR) inlet; or PEEK 6000 PSIG (415 BAR) inlet
- Filter: 10-micron sintered bronze
- Temperature range: -40°F to 140°F (-40°C to 60°C)
- Piston: Brass barstock
- Cv: 0.1
- Internal seals: FKM (encapsulated)
- Ports (bare body): 1/4 in FNPT
- Conformances: Cleanliness meets or exceeds CGA G-4.1; ANSI/ASME B40.1; PED 2014/68/EU; CRN OH5216